Mobile Tyre Puncture Repair in West Yorkshire (24/7)
We repair to British Standard BS AU 159 and come to you at the roadside, home or work. Typical ETA 30–60 mins.
Expert Tyre Repair and Puncture Service Near You
Got a flat or slow puncture? We repair punctures to BS AU 159 and get you moving again — across West Yorkshire, 24/7. Whether you’re on the M62, at home in Leeds or Bradford, parked at Trinity Walk in Wakefield, or near John Smith’s Stadium in Huddersfield, we’ll come to you fast and fix it safely.
Recent job example —
Leeds (LS28, Owlcotes): a driver picked up a screw near the retail park. We arrived within 45 minutes, removed the object, carried out a BS AU 159 plug-patch and a pressure test — back on the road in under 30 minutes.
What we do on arrival:
Full inspection of the tyre inside and out
Safe plug-patch repair where possible (British Standards compliant)
Re-inflate, pressure check and balance if required
If the tyre can’t be safely repaired, we can fit a replacement on site
We don’t just fix punctures. Ask us about our mobile tyre fitting and wheel balancing to keep your car safe and tyres wearing evenly. For urgent help, our 24/7 emergency tyre repair service is always available.
👉 Call us now on 07375 249399 for fast puncture repair anywhere in West Yorkshire.
Quick repair checker (BS AU 159)
✅ Usually repairable
• Nail/screw in the tread’s central zone
• Hole up to ~6mm
• No previous repair close by
❌ Not repairable — replacement needed
• Sidewall or shoulder damage
• Run-flat driven on very low/flat
• Large tear, bulge, exposed cords
We’ll inspect the tyre internally on arrival and confirm the safest option.
WHEN SHOULD YOU REPLACE A PUNCTURED TYRE?
Most tread punctures can be repaired safely to BS AU 159. Sometimes a replacement is safer — here’s how to tell.
**Replace the tyre if any of these apply**
• Damage is on the sidewall or shoulder
• Hole/tear is larger than ~6mm
• Bead damage, bulge or exposed cords
• Run-flat or driven very low for a distance
• Multiple punctures close together or overlapping an old repair
• Tread below legal limit (1.6mm) or manufacturer guidance
**Good news — often repairable**
• Nail/screw in the tread’s central repairable zone
• Small hole with no internal heat damage
• No previous repair nearby
We’ll confirm on arrival after an internal inspection. If a repair isn’t safe, we carry budget, mid-range and premium tyres and can supply & fit on the spot — then balance the wheel so you’re ready to go.
Need a replacement instead? See our mobile tyre fitting service.
We also provide Wheel Balancing across West Yorkshire.
Yes — if the damage is within the tread and repairable to British Standards, we repair it on the spot and get you moving quickly.
Most repairs take 20–40 minutes including inspection, plug-patch repair and pressure checks.
When the hole is too large, in the sidewall/shoulder, or the tyre has internal heat damage from being driven flat. If so, we’ll fit a safe replacement on site.
Yes — when completed to BS AU 159 after a proper internal inspection. If a repair isn’t safe, we’ll advise replacement.